If your side shields on Orthman 1tripr shanks are getting wore or fertilizer is getting to them, my product is a direct replacement to be welded on the shank. Dont pay $450 for a new shank when you can cut off the old ones and weld new ones on!
Options include Ar500 or Mild Steel
Ships Free******
I would recomend hard surfacing the mild steel like in the photos
If you are needing to replace a whole machine contact me and i can get you a bulk discount.
Steel paddle covers for John Deere’s power cast tail board.
Made from .074 G90 Galvanized Steel
If your machine needs paddles consider adding these bolt on covers to them to protect the plastic paddles.
These covers fit John Deere® part numbers H221045 and H221044.
Do not attach galvanized steel cover plates to used tailboard spreaders.
Easy to install uses 1/4” bolts. Set the plate on top of the plastic spinners and use a clamp to hold it tight, then drill though the plastic spinners using the plate as a guide install bolts and it’s complete!
Ships free and no hardware included
Call or text 3615509101 for custom thickness and material
3d printed Seed deflector made from UV resistant ASA plastic.
Made to mount on 1.25” square tubing with self tapping screws, However they can be mounted to any size square tubing
The seed deflectors fit 5/8" ID x 7/8" OD tubing.
I have them set on my drill to disperse seed evenly across the width of the drill.
These are curved bars for the Kuhn Gladiator Baskets.
This kit will have enough bars to cover a 12 row machine with half chains and half bars so 60 bars and 120 tabs. If you want more or less send me a text at (13615509101) and I will get you a custom quote.
Made from 3/8 flat bar and 1/4 tabs.
These are less than a replacement chain and will last way longer.
Their are 10 per basket but you can choose to do 5 bars and 5 chains to help resist plugging in less then ideal conditions
This Kit is completely diy and will require a welding machine and a little time. Included is 2 3d printed tacking jig made from plastic that can handle up to 450F. This jig is made for small tacks on each side of the tab.
Ships Free
These will be priced less then anything else on the market since it’s a DIY kit.
This weld on shallow tillage Coulter mount utilizes a 1”x3” shank
The design of this mount wraps around the shank to provide more weld surface.
The holes are also moved towards the front of the shank to allow more clearance with the closing discs.
Holes are 3/4”
****SOLD IN SETS OF 4******
Made from 1/2” steel!
Bolt on spike closing wheels for John Deere 750 No till Drill.
Made from 1/4” ar500
Uses 3 1/4” bolts to secure them to the cast closing wheel
You can use the spiked closing wheel as a drill guide, they are very easy to drill.
(The price is for 24 closers) if you need less or more contact me for a custom quote.
Ships Free
No results match your search. Try removing a few filters.
